Creating an outdoor living space has never been more popular. However, if your home lacks the basics and you are on a budget, you can always go the do-it-yourself route. In that case, start with a DIY patio.
Many homeowners pour or install a concrete slab Paved terrace. While both projects produce nice results, they may be too advanced for an inexperienced DIY enthusiast.
Here’s an easier alternative: build a small concrete patio with fabricated forms! Anyone can pour concrete mixes into plastic molds and gradually create a space for relaxation.
Read on to find out how easy it is!
About Quikrete WalkMaker
Quikretes WalkMaker Forms help homeowners find ways. Each plastic mold creates an approximately 2 square foot section using an 80 pound bag of premixed concrete.
Shoveling concrete mix into molds is an easy, DIY-friendly project – anyone can do it! With the durability and affordability of poured concrete, you can create bespoke walkways that look like brick or natural stone.
WalkMaker enters four designs: Basket Weave Brick, Country Stone Pattern, European Block Brick and Running Bond Brick. So there is an option that is sure to suit any style of living.
You can even color any concrete paving stone for a more natural finish that will blend in perfectly with yours Landscape design.
What does the WalkMaker have to do with a DIY terrace? Everything! Because you can adapt the instructions for creating the path to create a concrete patio instead.
Creating a DIY patio with WalkMaker
Using WalkMaker to create a concrete deck is not much different from creating a path.
The following has to be done:
Prepare the project site. WalkMaker requires very little surface preparation. Simply remove the lawn and smooth the surface. The form can be placed directly on the floor.
Lay out your DIY patio. The reusable WalkMaker molds are available in four different designs. It is easiest to use the Basket Weave Brick, Running Bond Brick, or European Block shapes as they all have straight edges. Start with the foundation of the house and train from the house.
Fill out the forms. Place the WalkMaker form on the floor and start filling the openings with concrete. Press the concrete into the form with a trowel. Work from the corners to set the concrete and remove any voids.
Move the cobblestones. Next, just flatten the surfaces and immediately remove the form. You don’t have to wait for the concrete to set. Then simply rotate the shape a quarter turn to vary the pattern for a random look. Use your towel to smooth any rough edges before the concrete hardens in about an hour.
Cure the concrete. Start curing the concrete immediately after the gloss has left the surface. Freshly laid concrete should be water-hardened with a fine water mist for 3-5 days. The curing step is necessary for concrete to achieve its intended strength.
To eliminate the need for water hardening, you can use Quikrete Acrylic Healing and Seal. Quikrete Acrylic Cure and Seal not only eliminates the water-hardening process, it also applies a semi-gloss finish that repels water and protects the concrete from grease, oil and food stains. It can be applied with a roller, a garden sprayer, or a brush.
Customize your DIY patio
You can always adjust these instructions to customize your patio. For example, add liquid paint onto the concrete mix to give the patio a more natural finish.
Mix a 10-ounce bottle of Quikrete for every two 60-pound or 80-pound bags of dry concrete mix Liquid cement paint with 5 liters of clean water. Mix the liquid in dry concrete until the color is consistent. Add clean water as needed until you have the uniformity you want.
You can also apply or squeeze a layer of play sand small stones or pea gravel in the wet concrete for different surfaces. Do this after the concrete has initially hardened – about an hour after it has been poured, if the fingerprint is hard but still damp.
These are just two ways to customize your DIY patio, but there are no limits to your imagination.
Did you pour a concrete terrace? Tell us about it in the comments!
Note: We are not the author of this content. For the Authentic and complete version,
Check its Original Source