Before you go! Share this content on any social media platform

Harmattan dominates this season, which can lead to dense fog and bring visibility close to zero. How do we drive safely? Here are some tips to help you master this challenge:

1.) Leave more space between the vehicles
Increase your meter reading by 5 seconds instead of the normal 2 seconds behind another vehicle. Never rush or accelerate to leave the fog.

2.) Drive slowly and carefully
Due to the bad view, the safest speed is moderate. This gives you time to brake effectively when there is a sudden need.

3.) Always be careful
The moisture can accumulate constantly
on the windshield, so it's difficult to see. Adjust the speed of the defroster and windscreen wiper as needed.

4.) Use fog lights or beacons (if available)

Many machines have factory fog lights or driving lights. These lights are generally mounted on the bottom, inside or below the front bumper. They are directed as far as possible outside the vehicle to the ground. The fog lights differ mainly from the headlights in the way they project the light. Fog lights often have clear or yellow lenses; while the driving lights usually have clear lenses. The light beam produced by the fog lamps is generally wide and flat; flat to stay close to the road surface and minimize the reflection through the fog – and wide to better illuminate the sides of the road (railings, curbs, painted lines on the road, etc.). Driving lights are generally just spot lights that penetrate the darkness of the darkness behind normal headlights. While the fog lamps are the best for foggy conditions, both types of lamps are better than the headlights due to their low mounting point on the vehicle. Try to use all combinations (if possible) of front fog lamps / front lights and turn on or off lights to determine which setting offers the best front visibility for the driver. Do not turn off lights or parking as they will help make your vehicle more visible to other pilots along and behind your vehicle.

5.) Use the dipped lights

The visibility in front of you decreases strongly in fog. Therefore, use the low beam headlamps of the vehicle (if the vehicle does not have fog lamps or driving lights). In heavy fog, the use of headlamps is prohibited. The light of the dazzling headlights is reflected by a dense fog. As the mist gets thinner, the high rays can become more effective. Check regularly if the fog is sufficiently diluted to use the high beam.

6.) Do not drift

There is a natural tendency to walk in the middle of the road when visibility gets poor. Make sure you stay in your lane.

7.) Go to the street side if you have no view

If it gets too difficult or too often, put on the phone and wait. Turn on the emergency lights to warn other drivers where you are.

8.) Use the right side of the street as a tutor

This will prevent you from getting into traffic or lighting yourself.

9.) Ask for help

Do not be afraid to ask your tourists for help finding cars and obstacles on the road.


Before you go! Share this content on any social media platform

Source link



Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.